OX-ON Fall Protection Kit Basic is an economically attractive standard fall protection kit suitable for e.g. scaffolding, facade or roof work. In the bag you will find OX-ON C3 Harness Basic L/XL: A lightweight full body harness with mating buckle. OX-ON Fall Arrester Basic 10 m: A fall arrest with 10 metres of rope and a galvanized steel rope grab. OX-ON Webbing Sling Comfort 1.2 m. An anchorage sling for the fall protection. The full body OX-ON C3 Harness Basic is easily adapted to the body with mating buckle at the chest and at the thighs for a comfortable fit and ensuring you full freedom of movement during your work. The harness is provided with a strong dorsal D-ring and front webbing loops for attachment. With OX-ON Fall Arrester Basic you get a energy absorber and a rope grab in galvanized steel with snap hook mounted on 10 metres of kernmantle rope (12 mm) with high durability and with properties that prevent the rope from twisting. The rope and the rope grab gives you both freedom of movement and safety, and it instantly slows you down at a possible fall. The rope is for vertical use, and the energy absorber releases a maximum energy absorption of 1 metre. The lower part of the rope should be fastened or provided with a counterweight. OX-ON Webbing Sling Comfort 1.2 meter gives you a compact and quick solution when you need to anchor your fall protection. The polyester sling is 26 mm wide, it only takes up little space and is extremely easy to use. The webbing sling has a tensile strength of >30kN You get the entire kit in the strong OX-ON backpack size S 36x28 cm. If possible, the anchorage point must be above head height in order to reduce the vertical clearance. You should notice that the vertical clearance at any time must be calculated before starting work with the fall protection. For further information on required vertical clearance, please refer to the attached user manual or contact OX-ON.