One set ABEK1 multi-filter protection against organic, inorganic fumes, acidic gases and ammonia. Set with two. Approval: EN 14387
Read more Add to product listA2 refill for half and full masks, with socket. Used for 3M masks of series 6000/7500. Set with two. Approval: EN 141
Read more Add to product list3M particle filter with bayonet fitting, P3 R, fits all half and full masks in the 6000 and 7000 series. This filter is particularly suitable for use in extremely dusty areas. The compact design of the filter makes it suitable for use in space-restricted working conditions. The protective cover protects the filter from sparks, water splashes, etc. The cover serves as a coarse dust filter that extends the life of the P3 filter. Extremely low inhalation resistance.
Read more Add to product listFFP3 refill particle filter for half and full masks. Set with 2. Approval: EN 143
Read more Add to product listActivated carbon filter to protect against organic and inorganic fumes, acidic gases, ammonia and particles. Dolomite tested. Set with two. Used for: X-plore 3300, 3500 and 5500 Approval: EN 141
Read more Add to product listComplete painting package, ready for use. Contents: 314.04 Dräger half mask (size M) 314.75 2 x A2-P3 filter. The set is specially developed to meet the protection requirements when working with paints and varnishes. Approval: EN 140
Read more Add to product listThe gas (half) mask is designed for the Maximask 2000 filter system. The gas and dust filters can be used for filter glass and for filter covers that can be ordered independently of the mask. The gas mask and filter is not intended to be used for fire-fighting or near open flames or molten metal where ignition of the filter can result in the development of toxic fumes. The gas and P2 for filters can be used as combination filters.
Read more Add to product listThe gas (half) mask is designed for the Maximask 2000 filter system. The gas and dust filters can be used for filter glass and for filter covers that can be ordered independently of the mask. The gas mask and filter is not intended to be used for fire-fighting or near open flames or molten metal where ignition of the filter can result in the development of toxic fumes. The gas and P2 for filters can be used as combination filters.
Read more Add to product listThe (half) gas mask is designed for the Maximask 2000 filter system. Gas and dust filters with pre-filter panes and pre-filter covers can be ordered independently of the mask. The gas mask and filter are not intended to be used in firefighting or near open flames or molten metal where ignition o the filter can result in the development of toxic fumes. The gas and P2 pre-filter can be used as a combination filter.
Read more Add to product listOX-ON Mask FFP1NR D Basic is the safety approved filtrating single-use mask, which you can use when working with less hazardous dry particles and liquid aerosols with a Workplace Exposure Limit (WEL) <5 mg/m3 (max. concentration 4 x WEL). You can for example use the affordable disposable mask when working with cardboard, textiles, feathers, graphite, clay, pollen, grinding of aluminium, plaster and quartz-free stone. The mask is dolomite tested, which means that you get a filter with a particularly large dust capacity with slowly increasing resistance. The sealing soft foam rubber at the nose as well as the mouldable aluminium nose bridge ensure you a perfect and comfortable adaptation to your face. The elastic band of the mask is latex-free. You get 2 pcs. masks per box.
Read more Add to product listCookies | Copyright © 2016 OX-ON A/S. All rights reserved |